Emm Tuning Carbon Fiber Front Lip - Q60


Manufacturer: Emm Tuning

Part Number:

You'll earn OG Points with this product!

Please review product information before ordering.

(Click on AFFIRM to Pre-Qualify)



  • On Sale
  • List Price $ 975.00



Carbon Fiber Front Lip by Emm Tuning 

Personalize your Q60 with high quality carbon fiber accents and accessories by EMM Tuning! Carbon accents help create an aggressive and unique appearance while standing up to the rigors of everyday use on weekend and daily driven cars.

EMM Tuning carbon fiber accents are hand made specifically for your Q60. These panels don't just stick over the factory chrome accents like other aftermarket alternatives; these pieces are molded over BRAND NEW OEM trim pieces to ensure flawless fit and highest quality. That means you're not only purchasing the carbon fiber accents, but you're also purchasing brand new replacement finishers as well!

All EMM Tuning Carbon Fiber accessories feature a UV resistant coating, followed by an automotive grade clear coat for enhanced UV protection!

Finishes Offered:

  • Carbon Fiber - Clear Coat Finish
  • Red or Blue Carbon Available for additional Cost

Features:

  • Quality Material
  • Exceptional Fitment

Vehicle Fitment:

  • 2017-Current Infiniti Q60 Coupe

Made to Order Product:

  • 4-6 Weeks to Produce, if not in stock

Production Time Frame: If not in stock, it will roughly take 4-6 weeks to arrive from manufacturer (These are not guaranteed set time frames and just estimates. It may be sooner or later).

Aftermarket Parts Disclaimer:  Minor tweaks and adjustments may be necessary (To include trimming, shaving, filling, modifications, etc). These are normal body work and installation steps when working with aftermarket parts. Fitment and quality of product will be dependent on the brand and manufacturer. Therefore it is NOT considered to be a defective product. Professional paint and installation is highly recommended.

Carbon Fiber Disclaimer:  All EMM Tuning Carbon Fiber Parts are coated in Automotive Clear Coated during final surface finish for a superior, long lasting appearance.

Hand Laid Carbon Fiber Disclaimer: Depending on the complexity of the products intricate design, hand laid carbon fiber parts may have minor shifts in the weave. Manufacturers will be held accountable for the quality their carbon fiber weave shifts if they do not fall within acceptable tolerances. Outcast Garage will do our best to quality check hand laid carbon fiber parts and refuse products with severe and serious defects in weave shifts and pattern. If you are unhappy with the minor shifts in the carbon fiber weave that is deemed acceptable based on the manufacturer’s tolerance and quality check, you may contact the manufacturer to begin a warranty and defective product claim.

Made to Order Product Disclaimer: This product is 'Made to Order' meaning it is NOT in stock and production of the product does not begin until an order has been placed for it. Listed production time frames are rough estimates and are not guaranteed time frames. It may be produced sooner or later. A sales representative will update you accordingly.

Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.

Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. 

Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. 

  • hello~ my name is young-namkoong from korea I am interested in this product. I would like to know if it is possible to produce a FRP for painting If possible, I'd appreciate it if you could quote me the price of the product.

    This is only produced in carbon fiber. You may always paint over the carbon fiber. 

International Shipment Policy

  • International orders are not eligble for refunds, cancellations or exchanges.
  • For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.

  • Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.


OG Essentials