Walker Kit by VIS Racing - G37/Q60 Coupe
Material & Finish:
- Fiberglass - Unpainted with black protective primer
- Eye-Catching & Aggressive Appearance
- Quality Fiberglass Material
- Exceptional Fitment
- 2008-2016 Infiniti G37/Q60 Coupe
Production Time Frame: This product is a "special & made to order part" and will take 6-8 weeks to produce and arrive from overseas (These are not guaranteed set time frames and just estimates.)
Aftermarket Parts Disclaimer: Minor tweaks and adjustments may be necessary (To include trimming, shaving, filling, modifications, etc). These are normal body work and installation steps when working with aftermarket parts. Fitment and quality of product will be dependent on the brand and manufacturer. Therefore it is NOT considered to be a defective product. Professional paint and installation is highly recommended.
VIS Racing Product Information
All VIS fiberglass body kits, bumpers, lips, side skirts, spoilers, and hoods are made of high quality fiberglass and come with wire mesh if applicable. Professional installation is required. Picture’s that are shown are for illustration purposes only. Actual product may vary due to product enhancement, so please ask the knowledgeable staff any questions or concerns you may have. Modification of part is required to ensure proper fitment. Please keep in mind aftermarket parts do not have the same fitment as OEM factory part. Test fit all body kit parts before any modification or painting (any altering will void returns/exchanges/warranties). Accessories such as fog lights, driving lights, splitter, canards, add-on lips, intake scoops, or other enhancement products are not included unless specified in the product description. Anything listed above that is not on your product would not be qualified as a product defect, but if your issue is due to fitment, pictures are required. The part must be placed upon the vehicle and taken with the vehicle in the picture. Then another picture of the area in question would be needed. To speed up the process, 4-5 pictures total from various angles should cover any other pictures required.
All fiberglass parts require test fitment before prepping, priming and painting. Such professional prep work is required for all fiberglass parts. All aftermarket parts require professional installation. Adjustment of the latches, hooks, brackets are sometimes necessary to ensure a "factory like" fit. These are normal body work and installation steps for all products sold, and additional fiberglass work may be necessary since these are aftermarket parts, and are no way sold or represented as OEM (Original Equipment Market) products. If there are small gaps or trimming that needs to be done prior to painting, this is not considered to be defective, and this is not uncommon with any aftermarket fiberglass companies and their products. Bodywork performed should not be by just any body/collision shop, but the shop should be familiar and skilled in fiberglass aftermarket products. All things listed are not uncommon of any company in regards to fiberglass aftermarket products, and if you feel that your product falls under defect, please refer to that section.
Some items sold by VIS Racing Sports may not be legal for street use in all states. It is the purchasers’ responsibility to comply with applicable state or federal laws. Any goods sold by VIS Racing Sports, Inc., other than as expressly provided in a written agreement between you and VIS Racing Sports, Inc. are sold “as-is” without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or fitness for a particular purpose, or the warranty of non-infringement of trademarks, trade dress, copyrights, patents, or other rights held by others.
Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.
Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.
Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).
Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.
International Shipment Policy
- International orders are not eligble for refunds, cancellations or exchanges.
For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.
- Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.