TruHart StreetMax Coilovers ***DISCONTINUED*** - Outcast Garage

TruHart StreetMax Coilovers DISCONTINUED

Name: TruHart StreetMax Coilovers ***DISCONTINUED***
Brand: TruHart
SKU: TH-N906
Availability: OutOfStock

by TruHart

Discontinued

$ 0.00

SKU TH-N906

You'll earn OG Points with this product!

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Quantity

Price Match | Make an Offer

StreetMax Coilovers by TruHart

Our flagship coilover, the StreetMAX offers a 32-way adjustable mono-tube damper. The 56mm (MacPherson applications) and 52mm (wishbone applications) shock bodies paired with steel lower mounts make the StreetMAX coilovers among the hardiest on the market. Separate preload and height adjustment allows for ride height adjustment while maintaining full strut travel at all times. Spring rate and valving are matched and application specific to provide a performance street feel also perfect for occasional track use.

Features

Features 32 Point Adjustable Dampers, front mounts, camber plates and adjustable lower mounts (where applicable).
Can be tuned to run on the street or the track, all by adjusting the dial on the damper from soft to stiff.
Every coil comes with Powder Coated Springs and anodized finishes to help protect the coilover and ensure longevity.
56mm (MacPherson applications) and 52mm (wishbone applications) shock bodies paired with steel lower mounts.
Backed by an industry leading 2 Year Warranty.

Vehicle Applications

2003-2007 Infiniti G35 Coupe
2003-2006 Infiniti G35 Sedan
2003-2008 Nissan 350Z

You recently viewed

Clear recently viewed

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.

TruHart StreetMax Coilovers DISCONTINUED

You recently viewed

QUESTIONS & ANSWERS

Have a Question?

Main Menu

Added to your cart:

Body Kits Ship for FREE to Lower 48 States

TruHart StreetMax Coilovers ***DISCONTINUED***

Related products

BC Racing Coilovers - BR Type - Infiniti G35 RWD (V35)

BC Racing

BC Racing Coilovers - BR Type - Infiniti G35/G37 RWD (V36)

BC Racing

BC Racing - BR Type Coilovers - Infiniti G35x/G37x AWD (V36)

BC Racing

TEIN Street Basis Z Coilover Kit - Infiniti G35 RWD (V35)

TEIN

TruHart StreetPlus Coilovers

TruHart

You recently viewed

QUESTIONS & ANSWERS

Have a Question?

Main Menu

Subscribe

Follow us

WHAT'S YOUR EMAIL?

TruHart StreetMax Coilovers DISCONTINUED