Air Lift APV2 Kit: 1992-1998 BMW 3-Series (E36)
(Click to Pre-Qualify)
Three letters come to mind when you mention sport touring luxury: BMW. Through most of the 90s, BMW ruled this segment of the market with the introduction of the E36 model. With the reputation the E36 has earned over the years, it has become an excellent candidate for modifications—bothon the show field and the road course. Air Lift Performance has embraced the E36′s sexy look and outstanding performance capabilities, and has answered with a complete air suspension system that will allow your Bimmer to lay on the ground and carve corners at your favorite track.
We understand you have many options to lower your BMW, but everything falls short of the versatility of air spring suspension. Sure, coil springs will get you low and improve your handling, but do you want to deal with the lumber-wagon-type ride? Coilovers are cool, but who wants to use a wrench in order to lower your car for the ultimate killer stance? With air springs, the push of a button lets you raise your ride to clear speed bumps and cumbersome steep driveways, with no worry of scraping your undercarriage. Best of all, the ride quality is unbeatable—you are literally riding on air!
Up front, we start with our monotube, threaded body strut, partnered with our smooth-riding, double-bellow air spring. Not only can you change the height of the car by increasing or decreasing air pressure, but since the strut body is threaded, you can change the height of the strut simply by spinning the lower mount up or down. To add even more adjustability, these struts have 30 different levels of damping so you can go from a smooth street ride to race-car-like stiffness with the twist of a knob. To top it all off, we include adjustable caster/camber plates, made out of T6061 aluminum and anodized red, for a show-stopping appearance and excellent race track adjustability.
For the rear, we replace the coil spring with a double-bellow air spring to compliment the front for the ultimate in ride quality. We also swap out the rear shock—a threaded body monotube shock, which also has 30 levels of damping adjustability—for your tuning pleasure.
Installation is simple with Air Lift Performance’s detailed instruction manuals; if you have the skill to wire a stereo or swap suspension components, you can have your car on the ground or tearing up your favorite road course in a matter of hours. Only basic hand tools are necessary to complete the job.
As the leader in air suspension products for over 60 years, Air Lift is committed to delivering quality parts that last. To ensure longevity for the customer, the key suspension components have been tested on a durability rig for over 1 million cycles, which equates to 100K miles. With a one-year, unlimited-mileage warranty—not to mention the Air Lift reputation for great customer service and technical support—you can purchase this kit with peace of mind.
The following 1992-1998 BMW E36 Chassis Models:
- 318i, 318is, 318ic: 1992–1995
- 318ti: ***1994–1996)
- 318i, 318ti: ***1996–1998
- 320i: 1994
- 323i, 323is, 323ic: 1996–1998
- 325i, 325is, 325ic: 1992
- 325i, 325is, 325ic: 1993–1995
- 328i, 328is, 328ic: 1996–1998
*** Front kit ONLY for 318ti models
- Modifications Req. Front: NONE
- Modifications Req. Rear: NONE
- APV2 Colored Backlight Screen Controller
- (8) custom user-defined pressure based presets
- Manual mode to individually control each corner
- Easy to navigate and understand user interface
- Fully integrated ECU and manifold
- Rise on Start functionality
- Compressor Wear-Down Test and Timer
- Customizable Compressor ON/OFF Pressure Setting
- Customizable RGB Controller Back Light and Brightness
- PSI or BAR Readings
- Easy install
Base APV2 Management Includes:
- AutoPilot V2 Digital Controller
- Integrated ECU + manifold
- Advanced electrical wiring harness
- 60 ft. of 1/4″ or 3/8" air line
- Auto-draining inline water filter
- All wiring, fuses, hardware, etc. required for installation
ADVANCED AIR MANAGEMENT
AutoPilot V2 is the most advanced pressure-based air suspension control system on the market. Nobody gives you more features or easier installation. Complete kits available with everything you need for a professional installation.
8 USER PRESETS
Program your favorite ride heights and easily adjust suspension dynamics to compensate for additional passengers and cargo. Set one for “all up” one for “all down” and anywhere in between.
SUPER COMPACT MANIFOLD
Our patent pending integrated manifold and ECU assembly makes installation simple with OEM quality wiring harness and only 3 wires to hookup to your electrical system: power, ground and ignition. Features large 6mm valves, integrated pressure sensors, and available with 1/4″ & 3/8″ line configurations.
ANY COMPRESSOR OR TANK
AutoPilot V2 can be purchased with any of our air tanks in aluminum or steel. We also offer compressor upgrades and dual compressor options. Have a tank and compressor already? Then opt for one of our “no tank/no compressor” kits.
Add an additional compressor for faster tank fill time and even greater reliability. Just use our second compressor integration harness and a compressor of your choice.
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov