Air Lift APV2 Kit: 2007-2009 Mazdaspeed3 (C1)


$ 1,100.00
SKU ALP-V2CONFIG-C1
You'll earn OG Points with this product!

(Click to Pre-Qualify)


When the Mazda 3 was released in 2004, it put an end to the need to drive a boring commuter car.  The compact size and nimble handling have made this little road rocket a huge hit among modern day hot-rodders. With endless amounts of lowering coils and coilovers available for the Mazda 3, Air Lift Performance has come up with the best solution to slam your 3 without giving up ride quality or handling.  With the simple push of a button and the twist of a damping knob, you can adjust your ride height and stiffness from luxury-smooth to racetrack-ready.

Up front, a double-bellow air spring is mated to a 30 level damping, adjustable, monotube strut, giving you the formula for excellent performance handling. The threaded body strut allows you to adjust the height of the lower mount, giving you almost endless ride height possibilities. Top all this off with adjustable camber plates—made out of T6061 and slathered in a sexy red hue—and you are ready to hit the show field, road course, and every road in between.

In the rear, a double-bellow air spring takes the place of a traditional coil spring, allowing you to choose the lowered height you crave.  To help you go as low as possible, we toss aside the factory lower-control arms in favor of our ultra-custom, tubular lower arms.  These arms are treated to a show-quality black powder coat finish, and even have provisions for mounting your sway bar.  To complement the other suspension goodies, we replace the rear shocks with 30-level damping, adjustable, monotube units that help to fine tune ride quality and handling.

Installation is a breeze with Air Lift Performance’s detailed instruction manuals. If you have the skill to wire a stereo and swap suspension components, you can have your car on the ground or tearing up your favorite road course in a matter of hours.  Only basic hand tools are necessary to complete the job.

As the leader in air suspension products for over 60 years, Air Lift is committed to delivering quality parts that last.  To ensure longevity for the customer, the key suspension components have been tested on a durability rig for over one million cycles, which equates to 100,000 miles.  With a one-year and unlimited-mileage warranty—not to mention the Air Lift Performance reputation for great customer service and technical support—you can purchase this kit with peace of mind.  Ditch those coils and get to a new level of low!

 

Vehicle Fitment

Mazda3 C1 Chassis

  • 2004-2009 Mazda3 (C1)
  • 2007-2009 Mazdaspeed3 (C1)
*NOTE: Early 2009 production models may have been first generation.
     

    Installation Details

    • Modifications Req. Front: NONE
    • Modifications Req. Rear: NONE

       

      Features

      • APV2 Colored Backlight Screen Controller
        • (8) custom user-defined pressure based presets
        • Manual mode to individually control each corner
        • Easy to navigate and understand user interface
      • Fully integrated ECU and manifold
      • Rise on Start functionality
      • Compressor Wear-Down Test and Timer
      • Customizable Compressor ON/OFF Pressure Setting
      • Customizable RGB Controller Back Light  and Brightness
      • PSI or BAR Readings
      • Easy install

       

      Base APV2 Management Includes:

      • AutoPilot V2 Digital Controller
      • Integrated ECU + manifold
      • Advanced electrical wiring harness
      • 60 ft. of 1/4″ or 3/8" air line
      • Auto-draining inline water filter
      • All wiring, fuses, hardware, etc. required for installation

       

      ADVANCED AIR MANAGEMENT

      AutoPilot V2 is the most advanced pressure-based air suspension control system on the market. Nobody gives you more features or easier installation. Complete kits available with everything you need for a professional installation.

       

       

      8 USER PRESETS

      Program your favorite ride heights and easily adjust suspension dynamics to compensate for additional passengers and cargo. Set one for “all up” one for “all down” and anywhere in between.

       

       

      SUPER COMPACT MANIFOLD

      Our patent pending integrated manifold and ECU assembly makes installation simple with OEM quality wiring harness and only 3 wires to hookup to your electrical system: power, ground and ignition. Features large 6mm valves, integrated pressure sensors, and available with 1/4″ & 3/8″ line configurations.

       

       

      ANY COMPRESSOR OR TANK

      AutoPilot V2 can be purchased with any of our air tanks in aluminum or steel. We also offer compressor upgrades and dual compressor options. Have a tank and compressor already? Then opt for one of our “no tank/no compressor” kits.

       

       

      EASILY EXPAND

      Add an additional compressor for faster tank fill time and even greater reliability. Just use our second compressor integration harness and a compressor of your choice.

       

      CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      You recently viewed

      Clear recently viewed