Air Lift APV2 Kit: 2008-2012 Lexus GS 460 RWD (S190)
(Click to Pre-Qualify)
When you think of Lexus, the first thing that comes to mind is probably a big body luxury car. All the creature comforts you could ever ask for, along with seats that you remind more of sitting in your living room rather than driving down the road. While that is surely the image Lexus likes to portray, the sleek midsize Lexus IS/GS series is making a huge splash in the custom car realm.
Straight from the factory this car is somewhat of a luxury hot rod. Crisp, aggressive lines, smooth powertrains and wheel swallowing fenders all lend themselves to customizers as a blank canvas, just begging to be modded. No matter the mods you try to throw at a vehicle, none of them have the visual impact like a slammed on the pavement stance. Being low is great, but don’t you want a suspension that gives you the look you are after along with great ride quality and track handling performance? Here is your solution!
For a nice 4.5″ drop in the front we mated our smooth riding double-bellow style air spring to threaded-body monotube shock. Not only do these shocks boast 30-levels of damping adjustment, but they are topped off with spherical bearing upper mounts for optimum control..
In the rear we followed the same winning formula as the front: double bellow air spring on a monotube shock. We have also employed a rubber isolated upper mount made of T6061 red anodized aluminum to keep your shock in place and quiet. This combination will drop the car 5.2″ from stock, keeping all eyes on you.
There you have it. A suspension that will allow you to carve your favorite curvy road with confidence, and will turn heads on the show field. Sound complicated? It’s really not. You can adjust your height at the touch of a button and fine tune your ride with the twist of the damping knob.
Detailed instructions will help you get your IS/GS slammed within a few short hours. If you have the ability to wire a stereo and swap out suspension parts, you should have no problem installing this air suspension kit. If you do run into a snag with installation, the Air Lift Performance tech support team is top-notch, and can walk you through any questions you may have.
In order to bring to market the most durable air suspension possible, Air Lift Performance tortured the components of this kit to one million cycles (equivalent to approximately 100,000 miles) on their hydraulic test rig at temperatures from -30 degrees F to 150 degrees F. Couple this test lab work with thousands of miles of on-road testing—not to mention the one-year manufacturer’s warranty—and this is a kit you can count on to handle whatever the road throws down!
Isn’t it time you had the option of getting a killer lowered look without giving up ride quality or worrying about scraping your ride? Ditch the springs and get to an entirely new level of low.
- 2006-2013 Lexus IS 250 RWD (XE20)
- 2006-2013 Lexus IS 350 RWD (XE20)
- 2008-2014 Lexus IS F RWD (XE20)
- 2006-2007 Lexus GS 300 RWD (S190)
- 2007-2012 Lexus GS 350 RWD (S190)
- 2006-2007 Lexus GS 430 RWD (S190)
- 2008-2012 Lexus GS 460 RWD (S190)
- Modifications Req. Front: NONE
- Modifications Req. Rear: NONE
- APV2 Colored Backlight Screen Controller
- (8) custom user-defined pressure based presets
- Manual mode to individually control each corner
- Easy to navigate and understand user interface
- Fully integrated ECU and manifold
- Rise on Start functionality
- Compressor Wear-Down Test and Timer
- Customizable Compressor ON/OFF Pressure Setting
- Customizable RGB Controller Back Light and Brightness
- PSI or BAR Readings
- Easy install
Base APV2 Management Includes:
- AutoPilot V2 Digital Controller
- Integrated ECU + manifold
- Advanced electrical wiring harness
- 60 ft. of 1/4″ or 3/8" air line
- Auto-draining inline water filter
- All wiring, fuses, hardware, etc. required for installation
ADVANCED AIR MANAGEMENT
AutoPilot V2 is the most advanced pressure-based air suspension control system on the market. Nobody gives you more features or easier installation. Complete kits available with everything you need for a professional installation.
8 USER PRESETS
Program your favorite ride heights and easily adjust suspension dynamics to compensate for additional passengers and cargo. Set one for “all up” one for “all down” and anywhere in between.
SUPER COMPACT MANIFOLD
Our patent pending integrated manifold and ECU assembly makes installation simple with OEM quality wiring harness and only 3 wires to hookup to your electrical system: power, ground and ignition. Features large 6mm valves, integrated pressure sensors, and available with 1/4″ & 3/8″ line configurations.
ANY COMPRESSOR OR TANK
AutoPilot V2 can be purchased with any of our air tanks in aluminum or steel. We also offer compressor upgrades and dual compressor options. Have a tank and compressor already? Then opt for one of our “no tank/no compressor” kits.
Add an additional compressor for faster tank fill time and even greater reliability. Just use our second compressor integration harness and a compressor of your choice.
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov