Air Lift APV2 Kit: 2010-2015 Chevrolet Camaro
(Click to Pre-Qualify)
Chevrolet did an amazing job with the fifth-generation Camaro—minus the fact that the stock ride height looks more like a truck than a muscle car! Sure, you can use coil springs or coilovers to help tidy up the stance, but then you have to worry about scraping everywhere you drive, and endure less than optimal ride quality. Air Lift Performance has developed the ultimate no-compromise suspension, that offers slot-car-like handling, the lowest possible drop for a Chevy Camaro, and amazing ride quality. How is all of that possible, you ask?
Starting up front, Air Lift Performance engineers took a threaded body, monotube, 30-way, damping, adjustable strut and topped it off with a smooth-riding, double-bellow air spring. This combination will allow you to drop the front of your Camaro to 4.2 inches below factory ride height, and will allow you to swallow a 22-inch wheel with ease. The engineers didn’t stop there! This strut also has an integrated adjustable camber plate made from T6061 aluminum, utilizing a high-quality spherical bearing for the best in suspension adjustability.
The rear kit mimics the front, with the same double-bellow-style bag wrapped around another 30-way damping, adjustable, monotube shock. A high-quality monoball bearing is nestled in a beautiful, red, anodized upper-shock mount. This automotive work of art will drop the rear of your Chevy Camaro 4.2 inches from the factory off-road stance, and requires minimal modification to bolt right in.
It’s not all about fancy parts and a show-stopping stance, though. This suspension was designed on the race track with handling performance that leads the way in development. Not only will the air springs give you a smooth, progressive spring rate under hard driving, but the 30 levels of damping adjustment really allow you to fine-tune the ride, and give you the handling you are looking for. Go from a smooth, comfortable ride to race-car-stiff handling with the twist of the knob. What does this mean, exactly? It means you can have a comfortable drive to the track, change a couple of settings, and carve corners with the best of them. It also means that steep driveways and speed bumps will no longer make you cringe. With the push of a button, you can raise the car to factory height and clear pretty much any obstacle that comes along.
Detailed instructions will help you get your Chevrolet Camaro slammed within a few short hours. If you have the ability to wire a stereo or swap out suspension parts, you should have no problem installing this air suspension. If you do run into a snag with installation, the Air Lift Performance tech support team is top-notch and can walk you through any questions you may have.
In order to bring to market the most durable air suspension possible, Air Lift Performance tortured the components of this kit to 1 million cycles (equivalent to approximately 100,000 miles) on their hydraulic test rig at temperatures from -30 deg F to 150 deg F. Couple this test lab work with thousands of miles of on-road testing—not to mention the one-year manufacturer’s warranty—and this is a kit you can count on to handle whatever the road throws down!
Isn’t it time you had the option of getting a killer lowered look without giving up ride quality and having to worry about scraping your ride? Ditch the springs and get to an entire new level of low.
- 2010-2015 Chevrolet Camaro (including convertibles)
- 2010-2015 Chevrolet Camaro SS
- 2014 Chevrolet Camaro Z/28
- Modifications Req. Front: Requires drilling of front strut tower for mounting
- Modifications Req. Rear: Remove section of factory upper spring mount
- APV2 Colored Backlight Screen Controller
- (8) custom user-defined pressure based presets
- Manual mode to individually control each corner
- Easy to navigate and understand user interface
- Fully integrated ECU and manifold
- Rise on Start functionality
- Compressor Wear-Down Test and Timer
- Customizable Compressor ON/OFF Pressure Setting
- Customizable RGB Controller Back Light and Brightness
- PSI or BAR Readings
- Easy install
Base APV2 Management Includes:
- AutoPilot V2 Digital Controller
- Integrated ECU + manifold
- Advanced electrical wiring harness
- 60 ft. of 1/4″ or 3/8" air line
- Auto-draining inline water filter
- All wiring, fuses, hardware, etc. required for installation
ADVANCED AIR MANAGEMENT
AutoPilot V2 is the most advanced pressure-based air suspension control system on the market. Nobody gives you more features or easier installation. Complete kits available with everything you need for a professional installation.
8 USER PRESETS
Program your favorite ride heights and easily adjust suspension dynamics to compensate for additional passengers and cargo. Set one for “all up” one for “all down” and anywhere in between.
SUPER COMPACT MANIFOLD
Our patent pending integrated manifold and ECU assembly makes installation simple with OEM quality wiring harness and only 3 wires to hookup to your electrical system: power, ground and ignition. Features large 6mm valves, integrated pressure sensors, and available with 1/4″ & 3/8″ line configurations.
ANY COMPRESSOR OR TANK
AutoPilot V2 can be purchased with any of our air tanks in aluminum or steel. We also offer compressor upgrades and dual compressor options. Have a tank and compressor already? Then opt for one of our “no tank/no compressor” kits.
Add an additional compressor for faster tank fill time and even greater reliability. Just use our second compressor integration harness and a compressor of your choice.
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov