Air Lift APV2 Kit: 2013-2018 Ford Focus ST


$ 1,100.00
SKU ALP-V2CONFIG-ST
You'll earn OG Points with this product!

(Click to Pre-Qualify)


2013 brought us Ford’s mid-size hot rod in the form of the Focus ST. With a peppy turbo 4 cylinder, smooth shifting 6 speed transmission, and aggressive styling cues the ST hit the road a great car. Ready to make a great car even BETTER?

Our team of Air Lift Performance engineers set out to build a suspension for your ST that will not only enhance the looks by getting the ride height in check, but also to give you a performance handling suspension without sacrificing ride quality. Couple that thought with our state of the art control system and you now have adjustable ride height at the push of the button plus the ability to change damping setting with the twist of a knob.

To drop the front 4.3″ from stock we started off by mating our smooth riding double bellow air spring to a monotube, 30 way damping adjustable, threaded body strut. To give you the ultimate in alignment precision we topped everything off with camber plates made of T6061 red anodized aluminum utilizing high quality spherical bearings.

In the rear we replace coil springs with a compact double bellow air springs. We also replace the OEM control arms with proprietary lower arms designed for max drop and improved cornering ability. Couple all this with our 30 way damping adjustable shocks and can now drop the rear 5.2″ from stock!

It’s not all about fancy parts and a show-stopping stance, though.  This suspension was designed on the race track with handling performance that leads the way in development.  Not only will the air springs give you a smooth, progressive spring rate under hard driving, but the 30 levels of damping adjustment really allow you to fine-tune the ride, and give you the handling you are looking for.  Go from a smooth, comfortable ride to race-car-stiff handling with the twist of the knob.  What does this mean, exactly?  It means you can have a comfortable drive to the track, change a couple of settings, and carve corners with the best of them.  It also means that steep driveways and speed bumps will no longer make you cringe.  With the push of a button, you can raise the car to factory height and clear pretty much any obstacle that comes along.

Detailed instructions will help you get your ST slammed within a few short hours.  If you have the ability to wire a stereo or swap out suspension parts, you should have no problem installing this air suspension.  If you do run into a snag with installation, the Air Lift Performance tech support team is top-notch and can walk you through any questions you may have.

In order to bring to market the most durable air suspension possible, Air Lift Performance tortured the components of this kit to 1 million cycles (equivalent to approximately 100,000 miles) on their hydraulic test rig at temperatures from -30 deg F to 150 deg F. Couple this test lab work with thousands of miles of on-road testing—not to mention the one-year manufacturer’s warranty—and this is a kit you can count on to handle whatever the road throws down!

Isn’t it time you had the option of getting a killer lowered look without giving up ride quality and having to worry about scraping your ride?  Ditch the springs and get to an entire new level of low.

 

Vehicle Fitment

  • 2013-2018 Ford Focus ST
     

    Installation Details

    • Modifications Req. Front: NONE
    • Modifications Req. Rear: NONE

       

      Features

      • APV2 Colored Backlight Screen Controller
        • (8) custom user-defined pressure based presets
        • Manual mode to individually control each corner
        • Easy to navigate and understand user interface
      • Fully integrated ECU and manifold
      • Rise on Start functionality
      • Compressor Wear-Down Test and Timer
      • Customizable Compressor ON/OFF Pressure Setting
      • Customizable RGB Controller Back Light  and Brightness
      • PSI or BAR Readings
      • Easy install

       

      Base APV2 Management Includes:

      • AutoPilot V2 Digital Controller
      • Integrated ECU + manifold
      • Advanced electrical wiring harness
      • 60 ft. of 1/4″ or 3/8" air line
      • Auto-draining inline water filter
      • All wiring, fuses, hardware, etc. required for installation

       

      ADVANCED AIR MANAGEMENT

      AutoPilot V2 is the most advanced pressure-based air suspension control system on the market. Nobody gives you more features or easier installation. Complete kits available with everything you need for a professional installation.

       

       

      8 USER PRESETS

      Program your favorite ride heights and easily adjust suspension dynamics to compensate for additional passengers and cargo. Set one for “all up” one for “all down” and anywhere in between.

       

       

      SUPER COMPACT MANIFOLD

      Our patent pending integrated manifold and ECU assembly makes installation simple with OEM quality wiring harness and only 3 wires to hookup to your electrical system: power, ground and ignition. Features large 6mm valves, integrated pressure sensors, and available with 1/4″ & 3/8″ line configurations.

       

       

      ANY COMPRESSOR OR TANK

      AutoPilot V2 can be purchased with any of our air tanks in aluminum or steel. We also offer compressor upgrades and dual compressor options. Have a tank and compressor already? Then opt for one of our “no tank/no compressor” kits.

       

       

      EASILY EXPAND

      Add an additional compressor for faster tank fill time and even greater reliability. Just use our second compressor integration harness and a compressor of your choice.

       

      CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      You recently viewed

      Clear recently viewed