APR x Outcast Front Wind Splitters (Carbon Fiber) - All Infiniti G35 Coupe Bumpers - Outcast Garage

APR x Outcast Front Wind Splitters (Carbon Fiber) - All Infiniti G35 Coupe Bumpers

Name: APR x Outcast Front Wind Splitters (Carbon Fiber) - All Infiniti G35 Coupe Bumpers
Brand: APR Performance
SKU: APRxOG-FWS-CF-1
Price: 475.0 USD
Availability: InStock

by APR Performance

$ 475.00

SKU APRxOG-FWS-CF-1

You'll earn OG Points with this product!

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Front Bumper

Quantity

Price Match | Make an Offer

Made-to-Order and ships out in 2-6 weeks.
Free Shipping to the Lower 48 US States.
Ships from APR Performance or Outcast Garage.

APR Performance and Outcast Garage has teamed up to bring quality and performance wind splitters for our customer's large selection of OEM and aftermarket front bumpers. APR Performance Front Wind Splitters integrate with the front bumper to reduce front-end lift and increase high-speed stability. APR Performance Front Wind Splitters are highly-effective at balancing the front-vs-rear downforce when used on conjunction with APR Performance Adjustable Wings.

Material

Carbon Fiber

Type: 3K + Fiberglass Mat Backing, 3K Pre-Preg, or 3K Pre-Preg Nomex Honeycomb
Pattern: 2x2 Twill Weave
Coating: UV-Stable Clear Coat

Features

Custom cut to each specific OEM or aftermarket front bumper
Outcast Garage will test each front wide splitter to provide necessary nylon washers for a secured mount on uneven/oddly shaped undersides of OEM or aftermarket front bumpers

Production Lead Time

Each front wind splitter takes approximately 4 weeks to be cut before it is ready for will-call or shipping

What is Included

(1) APR Performance x Outcast Garage Front Wind Splitter
(2) Adjustable Stainless-Steel Wind Splitter Support Rods
(1) Stainless Steel Hardware Pack
(1) Nylon Washer Pack (If applicable for front bumper)

Vehicle Fitment

Each front wind splitter will be cut specific to your OEM or aftermarket front bumper and tested for any necessary nylon spacers to help secure the front wind splitter to you

Product Policy

Cancellation: 30% Fee
Returns & Exchanges

Within 7 days of receiving front wind splitter
30% restocking fee (must be unopened)
Forfeit original shipping cost
Returnee is responsible for return shipping

INSTALLATION GUIDELINES (CLICK TO VIEW)

You recently viewed

Clear recently viewed

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.

APR x Outcast Front Wind Splitters (Carbon Fiber) - All Infiniti G35 Coupe Bumpers

You recently viewed

QUESTIONS & ANSWERS

Main Menu

Added to your cart:

Body Kits Ship for FREE to Lower 48 States

APR x Outcast Front Wind Splitters (Carbon Fiber) - All Infiniti G35 Coupe Bumpers

Related products

APR Performance Splitter Rods

APR Performance

APR x Outcast Front Wind Splitters (Carbon Fiber) - All Infiniti G37 Coupe Bumpers

APR Performance

APR Performance Carbon Fiber Hood Vents (Narrow) - Universal

APR Performance

APR Performance Carbon Fiber Air Duct - 9.25" x 4.75"

APR Performance

APR Performance Carbon Fiber NACA Duct Type 1 (NACA-020825) - Universal

APR Performance

You recently viewed

QUESTIONS & ANSWERS

Main Menu

Subscribe

Follow us

WHAT'S YOUR EMAIL?