APR x Outcast Front Wind Splitters (Carbon Fiber) - All Infiniti G37 Coupe Bumpers


Manufacturer: APR Performance

Part Number: APRxOG-FWS-G37C-CF

You'll earn OG Points with this product!

Please review product information before ordering.

(Click on AFFIRM to Pre-Qualify)



  • On Sale
  • List Price $ 475.00



 

  • Made-to-Order and ships out in 2-6 weeks.
  • Free Shipping to the Lower 48 US States.
  • Ships from APR Performance or Outcast Garage.

 

APR Performance and Outcast Garage has teamed up to bring quality and performance wind splitters for our customer's large selection of OEM and aftermarket front bumpers. APR Performance Front Wind Splitters integrate with the front bumper to reduce front-end lift and increase high-speed stability. APR Performance Front Wind Splitters are highly-effective at balancing the front-vs-rear downforce when used on conjunction with APR Performance Adjustable Wings.

 

Material

  • Carbon Fiber
    • Type: 3K + Fiberglass Mat Backing, 3K Pre-Preg, or 3K Pre-Preg Nomex Honeycomb
    • Pattern: 2x2 Twill Weave
    • Coating: UV-Stable Clear Coat

 

Features

  • Custom cut to each specific OEM or aftermarket front bumper
  • Outcast Garage will test each front wide splitter to provide necessary nylon washers for a secured mount on uneven/oddly shaped undersides of OEM or aftermarket front bumpers

     

    Production Lead Time

    • Each front wind splitter takes approximately 4 weeks to be cut before it is ready for will-call or shipping

     

    What is Included

    • (1) APR Performance x Outcast Garage Front Wind Splitter
    • (2) Adjustable Stainless-Steel Wind Splitter Support Rods
    • (1) Stainless Steel Hardware Pack
    • (1) Nylon Washer Pack (If applicable for front bumper)

     

    Vehicle Fitment

    • Each front wind splitter will be cut specific to your OEM or aftermarket front bumper and tested for any necessary nylon spacers to help secure the front wind splitter to you

     

    Product Policy

    • Cancellation: 30% Fee
    • Returns & Exchanges
      • Within 7 days of receiving front wind splitter
      • 30% restocking fee (must be unopened)
      • Forfeit original shipping cost
      • Returnee is responsible for return shipping

     

    INSTALLATION GUIDELINES (CLICK TO VIEW)

     

    Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.

    Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. 

    Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

    Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. 

    HAVE A QUESTION?

    Be the first to ask a question about this.

    Ask a Question

    International Shipment Policy

    • International orders are not eligble for refunds, cancellations or exchanges.
    • For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.

    • Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.


    OG Essentials