The BR Series model is the perfect choice for street driving and the occasional road course or autocross duty. With easily accessible (vehicle dependent) adjustment knobs for fine-tuning compression and rebound, in addition a separately adjustable ride height, having performance coilover system could not be any easier. The driver chooses how low or high they want their vehicle to sit (no preset ride height here!) and a BC Racing patented concave lower locking ring keeps it locked securely in place. Each system comes with pillowball mounts to provide the most feedback possible from the suspension and to sharpen steering response. BC Racing front and rear camber plates (vehicle dependent) also allow a driver to get the perfect alignment setup without compromise. Each of these features is offered, while providing a strong, attractive coilover system at a reasonable price.
- Mono-Tube Shock Design
- Full Height Adjustability (Shock Body)
- 30 Levels of Dampening Adjustment (Compression/Rebound)
- 1 Year Warranty Against Manufacturer Defect
- Completely Rebuildable
- Spanner Wrenches for Height Adjustment
- Brake Line Bracket
True Coilover Rear
- Front Spring Rate: 14kg/mm (Default)
- Rear Spring Rate: 12kg/mm (Default)
- Front Spring Rate: 10kg/mm (Default)
- Rear Spring Rate: 8kg/mm (Default)
- 2003-2007 Infiniti G35 Coupe RWD (V35)
- 2003-2006 Infiniti G35 Sedan RWD (V35)
- Rubber Front and Rubber Rear upper Mounts
- Rear bucket adapter needed fro rear spring change
- Camber plates not available for this vehicle
Custom Order Notes
- Swift Spring upgrades and custom spring rate require additional build-time (estimated 2-4 weeks)
BC Racing Warranty
- BC Racing North America offers a full one-year manufacturer warranty for all of our products.
- Free Ground Shipping! (48 Lower States Only)
Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.
Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.
Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).
Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.
International Shipment Policy
- International orders are not eligble for refunds, cancellations or exchanges.
For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.
- Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.