ESR Wheels SR05 19"

Manufacturer: ESR Wheels

Part Number:

There are 2 in stock. (Please verify with us if inventory is lower than 2. Inventory does not apply to 'In-Store Pickups') Please review product information before ordering.


  • Sale
  • $ 199.75
  • Regular price $ 175.00





19" SR05 Wheels by ESR

Our manufacturing and development process gives us and upper hand on delivering the best after-market wheels without hurting your wallet. Bringing you Low Pressure Cast, Light Weight Durability, High Polished Machine Lip, and Removable Rivets! At the ESR Wheel technology department, our engineers focus a lot on bringing you the best neck-breaking designs and performance technology. All of our wheels offer clearance for the most high performance brake upgrades and tire pressure sensor compatibility. They have been designed to optimize the stiffness-to-weight ratio while providing safety and performance when put to the test. The manufacturing process at ESR wheels requires each rim to simulate road condition stress test to test the functionality and the durability of each of the wheels. After a wheel has been injected with a gas-containing helium up to a specified pressure, the Helium Leak Tester uses Mass Spectrometry to measure leakage into the chamber and then determines where the leakage is, and whether is passes the threshold. This allows us to make sure that the wheels will be 100% light weight, and durable. ESR Wheels is dedicated to provide the utmost excellence in customer service and manufacturing the highest quality wheels. Our products are put through the highest standard in testing and quality control, bringing you the best of the best after-market wheels. We take pride in the details, so we are better able to uphold our promise on delivering the very best.

Features

  • SR05 in 19 Inch
  • MSRP: $250ea
  • SR05 Wheels all come in a machine polished lip.
  • The rivets are removable as well!
  • JWL & VIA Certified
  • Free Shipping

Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.

Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. 

Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. 

Customer Reviews

Based on 1 review Write a review

HAVE A QUESTION?

Be the first to ask a question about this.

Ask a Question

International Shipment Policy

  • International orders are not eligble for refunds, cancellations or exchanges.
  • For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.

  • Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.