Front Lip Spoiler by Stillen - GTR
Utilizing Steve Millen's expansive racing heritage, STILLEN is proud to release functional high quality urethane Front Lip Spoiler for the Nissan GT-R R35. Enhancing the aerodynamic performance of such a finely tuned car like the GT-R is no small feat. When developing the car Nissan did a great job of developing an aero package that works well, but left some room for improvement for the true enthusiast. One of the most common complaints of GT-R owners is the car has a tendency to "push" when exercised hard on a race course (understeer). Two ways to fix this condition are through the suspension, or increasing downforce via aerodynamics of the car at higher speeds. Increasing the aerodynamic downforce keeps the front end of the car planted and therefore improving front grip, reducing the "push" effect. The STILLEN Urethane Lip Spoiler adds 2" of length to the OEM fascia, and installs directly onto the vehicle over the factory piece. This lip spoiler is designed to hold additional air onto the nose, with flares on the side corners producing a canard effect for extra control. Another major benefit of the front lip spoiler is the durability. Constructed out of high-quality polyurethane, this front spoiler is nearly indestructible and carries a limited lifetime warranty. This means it can stand up to the hazards of the race track or the drive around town with 100% driver/owner confidence.
- Front Lip Spoiler - Installs Over OEM Fascia
- Painted Matte Black - Ready to Install
- Can Be Painted or Color Matched
- Polyurethane Construction - Developed and Manufactured In-House
- Vehicle Specific Application
- Limited Lifetime Warranty
- 2012-2015 Nissan GTR
Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.
Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.
Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).
Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.
International Shipment Policy
- International orders are not eligble for refunds, cancellations or exchanges.
For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.
- Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.