Stillen Generation 2 Dual Cold Air Intake Kit - Q50

Manufacturer: Stillen

Part Number: 403230

There is 1 in stock. (Please verify with us if inventory is lower than 2. Inventory does not apply to 'In-Store Pickups') Please review product information before ordering.


  • Sale
  • $ 510.00
  • Regular price $ 522.38





Generation 2 Dual Cold Air Intake Kit by Stillen - Q50

For those With a Q50 Sedan and want improved performance with a show quality shine, we've introduced our Gen 2 Long Tube Intakes. STILLEN was very excited to begin working on the Infiniti Q50 as soon as the car was released. For years STILLEN has been recognized as the leader in performance parts for the Nissan/Infiniti vehicles. It is only natural that STILLEN immediately begin developing performance parts for this wonderful luxury performance car. For the Q50 performance air intake STILLEN engineers looked at the previous vehicle intakes and took design cues from the Gen. 2 intakes which were so popular on previous vehicles. Incorporating urethane heat shields which direct air from the factory ram air ducting inside the engine bay this polished aluminum cold air intake takes advantage of the history of the Gen. 2 intakes and the great design of the Infiniti engineers.

These intakes come with filters backed with 1,000,000 mile warranties and are CARB Exempt. As with all of our urethane intake boxes, these can be left natural black or painted to match the color scheme of the car.

Features:

  • Polished Aluminum Mandrel Bent Pipes Completely Replace Factory Tubes
  • Silicone Connectors
  • True Cold Air design via Urethane Boxes
  • Genuine K&N Filters - Dual Cone w/Integrated Velocity Stack
  • Filters have a 1,000,000 Mile Warranty from K&N
  • No Check Engine Light (CEL) Problems
  • No Chance of Hydrolocking
  • Ease of access to filter elements
  • Easy to Follow Instructions
Vehicle Application
    • 2014-Current Infiniti Q50

    Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.

    Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. 

    Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

    Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. 

    HAVE A QUESTION?

    Be the first to ask a question about this.

    Ask a Question

    International Shipment Policy

    • International orders are not eligble for refunds, cancellations or exchanges.
    • For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.

    • Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.