If you want the look and feel of a full racing harness, but still need to stay "Street Legal", the DRIFT III is the belt you need with its 3" wide racing shoulder belts.
This belt manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt laws. The belt features a center push button release buckle and our shoulder belt asmTM system to prevent submarining. 3" shoulder belts and 2" lap belts with comfort padding.
The lap belt Snap-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided. Belts are available with or without shoulder end fittings.
Please Note: (DRIFT belts should only be used with seats that have a "pass-through" for the shoulder harnesses such as a stock seat with an adjustable up and down headrest or a race type seat with openings for the shoulder belts. Never use this type of belt with a seat that has an integrated head rest that would require the shoulder belts to be routed around the outside of the headrest. The rear passenger seats must not be used while the DRIFT belt is installed.)
Takata Quality - made by Takata Racing (Europe) in Germany
- Street Oriented 4 point harness
- 3" Shoulders, 2" Lap belts with Pull-down adjusters
- Snap-on hardware
- Street Legal
- Available in Green or Black
FREE SHIPPING TO THE LOWER 48 STATES!
Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.
Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.
Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).
Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.
International Shipment Policy
- International orders are not eligble for refunds, cancellations or exchanges.
For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.
- Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.