Borla Stainless Steel Headers - Infiniti G35 / Nissan 350Z


Manufacturer: Borla

Part Number: 17221

You'll earn OG Points with this product!

Please review product information before ordering.

(Click on AFFIRM to Pre-Qualify)



  • On Sale
  • List Price $ 720.00



 

Borla Performance Industries offers an incredible stainless steel exhaust system for the popular Infiniti G35 and Nissan 350Z.  Unlike other aftermarket exhaust that actually loose power in mid-range and low end, Borla gains through the entire RPM range. Serious performance enthusiasts understand that true power gains are not simply a big number at max RPM but rather strong torque gains over the full curve. Borla Performance Industries, the original pioneers of aerospace-grade high quality austenitic stainless steel (superior to T-409 or aluminized steel) free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy – all with an easy bolt-on installation. All BORLA street products carry the famous BORLA written million-mile warranty

  

Disclaimer

  • LEGAL ONLY FOR RACING VEHICLES THAT MAY NEVER BE USED, OR REGISTERED, OR LICENSED FOR USE, UPON A HIGHWAY.

 

Features

  • High Quality Stainless Steel
  • Austenitic

 

Specifications

  • Collector (Outer Diameter): 2"
  • Primary Tube (Outer Diameter): 1.5"

 

What is Included

  • (2) Ceramic Coated Headers
  • (2) Header Gasket
  • (2) Header to Downpipe Gasket
  • (2) Bolt/Nut Assembly

 

Vehicle Application

  • 2003-2008 Nissan 350Z
  • 2003-2007 Infiniti G35 Coupe RWD
  • 2003-2006 Infiniti G35 Sedan RWD & AWD

 

Engine Application

  • VQ35DE
  • VQ35DE Revup
  • VQ35HR

 

Download Installation Instructions

 

Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.

Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. 

Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. 

HAVE A QUESTION?

Be the first to ask a question about this.

Ask a Question

International Shipment Policy

  • International orders are not eligble for refunds, cancellations or exchanges.
  • For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.

  • Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.


OG Essentials