48-51″ Universal Harness Bar by Braum Racing
If you’re serious about racing, chances are you either have a 5 or 6 point harness installed in your track vehicle, or you’re thinking about installing one. To accomplish this, however, you’ll need a solid foundation upon which to mount your harness. Your stock seat belt mounting points won’t work; they’re in the wrong location and won’t provide the kind of support you need to stay firmly planted in your seat during hard cornering and collisions. That’s where our universal harness bars come into play. Our harness bars allow you to install 5 or 6 point harnesses in almost any vehicle. They are adjustable so you don’t have to worry about less-than-optimal fitment, or whether or not they can be reused in your next track vehicle. Buy with total confidence.
Our universal harness bars are made of high strength steel, powder coated in the all-time-favorite colors of glossy white, glossy red, matte black, and glossy black. They are 48-51” in length to accommodate a broad variety of applications, and allow for 4 point mounting for a stable and secure fit. The lower bars are fitted with high strength, steel, ball joint rod ends for fine-tuned adjustability and fitment catered to your specific vehicle. In addition you will receive high quality hardware for a quick, complete, and reliable installation.
- Compatible with 5 or 6 Point Harness'
- This is universal harness bar is compatible with almost every vehicle
- This is adjustable from 48" to 51"
- Multiple Colors available
BRAUM & Outcast Garage does not guarantee the size fitment for any seats, harnesses and/or universal products due to varied vehicle interior dimensions and configurations. Please use the product dimensions provided to compare with your existing layout to determine fitment. BRAUM & Outcast Garage will not be held liable for incorrect assessments regarding fitment.
Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.
Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.
Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).
Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.
Do these fit a 2008 infiniti g37 coupe?
These are universal with length adjustment. It will fit the G37 Coupes.
International Shipment Policy
- International orders are not eligble for refunds, cancellations or exchanges.
For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.
- Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.