D2 Racing RS Coilovers - Q50


Manufacturer: D2 Racing

Part Number: D-IN-15

You'll earn OG Points with this product!

Please review product information before ordering. Please review product information before ordering.

Monthly Payments:

  • On Sale
  • MSRP $ 1,137.50



RS Coilovers by D2 Racing

The RS Series suspension kit is our most popular coilover. Featuring a 36-way damping and rebound adjustable monotube design, RS Series coilovers are perfect for the modified street car that also sees occasional track days. This coilover has separate height and preload adjustments allowing for optimal suspension tuning while maintaining full strut travel at all times. 

Features

  • Uses either a rubber upper mount or pillowball rubber upper mounts. McPherson-Style suspension applications come with camber plates.
  • 36 different damping adjustments
  • Use SAE9254 materials for spring to avoid deformity and 6061 aluminum to avoid rusting when it rains or snows.
  • The perfect coilover for your daily driver or moderate track vehicle. Maintains factory comfort level.
  • The ride height can be dropped 60mm~100mm from OE ride height. Certain applications are more.

Vehicle Application

  • 2014-2016 Infiniti Q50

Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.

Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. 

Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. 

  • Do these fit 2017 3.0tt rs400

    These will fit but is not recommened since the RS 400 weighs and balances different from the base Q50. We recommend this coilover for your RS 400: https://www.outcastgarage.com/collections/infiniti-13-q50-v37-coilovers/products/rs-r-sports-i-coilovers-q50-3-0tt-silver-sport-red-sport

International Shipment Policy

  • International orders are not eligble for refunds, cancellations or exchanges.
  • For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.

  • Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.


OG Essentials