Duraflex TS-1 Front Bumper - G35 07-08 Sedan


Manufacturer: Duraflex

Part Number: 107672

You'll earn OG Points with this product!

Please review product information before ordering. Please review product information before ordering.

Monthly Payments:

  • On Sale
  • MSRP $ 250.00



TS-1 Front Bumper by Duraflex (Extreme Dimensions) - G35 Sedan

Material and Finish

  • Fiberglass - Raw & Unpainted

Features

  • Hand laid, high quality 6 oz. fiberglass
  • Signature black finish
  • High quality weather resistant aluminum mesh grille (where applicable)
  • Proprietary polymer blend for maximum flexibility
  • Increased durability and longer service life
  • Reduced damage rate up to 75%
  • Limited warranty and satisfaction guarantee

Vehicle Application

  • 2007-2008 Infiniti Sedan
  • 2009 Infiniti G37 Sedan

Note

  • Regularly Stocked Item (If out of stock, takes 3-4 weeks to produce)
  • Requires extensive modifications to properly fit. (Not a manufacturer's defect)

Aftermarket Parts Disclaimer:  Minor tweaks and adjustments may be necessary (To include trimming, shaving, filling, modifications, etc). These are normal body work and installation steps when working with aftermarket parts. Fitment and quality of product will be dependent on the brand and manufacturer. Therefore it is NOT considered to be a defective product. Professional paint and installation is highly recommended.

Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.

Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. 

Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. 

  • Does this bumper fit if i have the technology package?

    The bumper will have to be modified heavily to fit the technology package as well fitment.

International Shipment Policy

  • International orders are not eligble for refunds, cancellations or exchanges.
  • For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.

  • Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.


OG Essentials