Seibon NS-Style Carbon Fiber Side Skirts - 370Z (09-10)

Manufacturer: SEIBON

Part Number: SS0910NS370-NS

There are 0 in stock. (Please verify with us if inventory is lower than 2. Inventory does not apply to 'In-Store Pickups') Please review product information before ordering.


  • Sale
  • Regular price $ 800.00



NS-Style Carbon Fiber Side Skirt by Seibon - 370Z

Material & Finish:

  • Carbon Fiber - Vacuum Infused Resin with UV Protection Gel

Features:

  • Eye-Catching & Aggressive Appearance
  • Quality Carbon Fiber Material
  • Exceptional Fitment
  • Rainguards

Vehicle Fitment:

  • 2009-2010 Nissan 370Z

Production Time Frame: If not in stock, it will roughly take 6-8 weeks to arrive from overseas (These are not guaranteed set time frames and just estimates. It may be sooner or later).

Aftermarket Parts Disclaimer:  Minor tweaks and adjustments may be necessary (To include trimming, shaving, filling, modifications, etc). These are normal body work and installation steps when working with aftermarket parts. Fitment and quality of product will be dependent on the brand and manufacturer. Therefore it is NOT considered to be a defective product. Professional paint and installation is highly recommended.

Carbon Fiber Disclaimer:  Parts layered with 'UV Protection Resin Gel' can still be subjected to UV damage from the sun, discoloring the resin and turning it yellow. It is highly recommended that carbon fiber parts be sprayed with an automotive grade clear coat. Outcast Garage nor the product's manufacturer will NOT be responsible for discoloration of the carbon. Parts NOT layered with any 'UV Protection Resin Gel' WILL discolor in the sun, so a clear coat is required.

Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.

Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. 

Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. 

HAVE A QUESTION?

Be the first to ask a question about this.

Ask a Question

International Shipment Policy

  • International orders are not eligble for refunds, cancellations or exchanges.
  • For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.

  • Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.