Stillen Unpainted Rear Diffuser - Q50

Manufacturer: Stillen

Part Number: KB11222

Please review product information before ordering.


  • Sale
  • $ 319.93
  • Regular price $ 399.91





Unpainted Rear Diffuser by Stillen - Q50

This rear diffuser is made of durable polyurethane, and installs without cutting, trimming or altering the vehicle in any way. The part comes with proper 3M automotive trim foam tape pre-installed onto the diffuser, as well as adhesion promoter to make your installation quick and easy. Included are some screws to fully secure the diffuser.

We are offering the diffuser either unpainted or painted matte black. The painted version arrives ready to install, or the unpainted version can be painted to the color of your choice just like the other STILLEN polyurethane body components. Customers have gone a variety of different routes, including gloss black, color matching the vehicle, dark gray on black vehicles, as well as making the diffuser carbon fiber looking with the help of hydrographics.

Materials and Finish

  • Polyurethane - Unpainted

 Features

  • Part Comes Pre-Installed with 3M Automotive Tape (Same as OEM uses)
  • No Cutting or Modification to Bumper - Removable
  • Unpainted - Ready for paint and Direct Installation
  • Polyurethane Construction
  • Comes with 3M mounting tape

Vehicle Application

  • 2014-Current Infiniti Q50

Production Time Frame: If not in stock, it will roughly take 6-8 weeks to arrive from overseas (These are not guaranteed set time frames and just estimates. It may be sooner or later).

Aftermarket Parts Disclaimer:  Minor tweaks and adjustments may be necessary (To include trimming, shaving, filling, modifications, etc). These are normal body work and installation steps when working with aftermarket parts. Fitment and quality of product will be dependent on the brand and manufacturer. Therefore it is NOT considered to be a defective product. Professional paint and installation is highly recommended.

    Fiberglass Installation & Painting (FRP): There will always be minor sanding, shaving, cutting, tweaking, adjusting and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations.

    Carbon Fiber Care (CF, CFRP): All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. 

    Hand-Land Carbon Fiber (CF, CFRP): The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

    Polyurethane Care, Installation & Painting (Poly): All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. 

    HAVE A QUESTION?

    Be the first to ask a question about this.

    Ask a Question

    International Shipment Policy

    • International orders are not eligble for refunds, cancellations or exchanges.
    • For customers outside of the United States and Canada, please fill out the following form for an accurate shipping quote. Canadian customers may proceed with check out to view shipping rates.

    • Current international quote turnaround times are delayed due to new service acquisition to provide the best rates for our customers.